wholesale bicycle parts suppliers

Bicycle rely on human engine driven vehicles, and smooth bearing can reduce kinetic energy consumption, which makes the speed faster, and each bearing of bicycle is not suitable, even if is the minimum power loss and friction rise will affect the speed, so in order to perfect smooth traffic, it is necessary to have near perfect bearings to match.

According to SKF Bearing product warranty book, Ken Perlin of 16 percent is damaged in the assembly, among non 36 percent lubrication damage and 14 per cent from the pollution damage, 34 percent is fatigue after their damage and fatigue damage is to be very long, a low speed deep groove ball bearings, the theory on life is permanent, so maintenance and installation is very important.

Why the bearing will be damaged?

Only a part of the bearing is damaged in the actual use, most of the bearings are used more than the design life of the machine or equipment itself.

Many reasons for bearing damage, exceed the original estimates of load, non effective seal or tight fit, resulting in a small gap, any kind of factors has its special form of damage, and will leave the special signs of damage. Therefore, to inspect the damaged bearings, in the majority of cases can found that the damage to the guide, and give the reason take prevention measures.

In general, there are more than 30 is the damage caused by fatigue, while the other one percent more than 60 are due to poor lubrication, pollution, improper installation method caused by.

However these Shunhe situation and bearing industrial relations, such as the pulp and paper industry, mostly due to pollution, poor lubrication caused by, and not due to lead to material fatigue.

And bearing of the bicycle bearing damage water resulting in internal rust occurrence is not suitable, also once because of the wrong use of very low pressure oil, resulting in bearing more easily damaged, there are errors in after bearing knock, resulting in load is found not to shun, and soon began to damage occurred.