Mountain bike maintenance tips

1 car chain to rust tips
Mountain car chain if rusty, first with a kitchen cleaning agent to clean the rust, and then clean the detergent, the washing on the diesel, the mountain bike chain can be restored as ever.
2 tires inflated to be appropriate
Mountain tire tires inflated, the resistance increases, driving effort, the outer wall is vulnerable to fracture; inflated enough, the wheels lose flexibility, driving bumpy, tire force is too large, the tire cord layer is easy to burst, shorten Service life.
3 parts maintenance tips
Mountain bike coating with a dry cloth to dust, coated with neutral oil; body paint with chicken broom whisk floating ash, can not use oil rub, can not sun exposure. Where painted with a varnish car, can not use car wax light, will drop paint. Bicycle shaft, flywheel, fork, pedal, etc., should always add some butter or oil, flywheel should add some thin oil, once a year with kerosene cleaning.
4 should not use sewing machine oil
Sewing machine oil is a thin lubricant, add the axle will make the original butter diluted and lost, which in turn reduced the grease inside the grease lubrication and rust performance.
5 tips in use
A. When cycling can pay attention to the following aspects, the life of your mountain bike will grow.
B. Encountered uneven and potholes, to slow slow ride, so as not to cause the car caused by crack vibration caused by loose screws, slip off.
C. Do not ride high speed or curve ride, but also pay attention to Do not brakes, especially to prevent the ground iron, glass and other things to puncture the inner and outer tires.
D. Do not overload, ordinary vehicle weight can not exceed 120 kg; load bicycles can not exceed 170 kg, with particular attention to avoid unilateral load, to prevent body deformation.
6 tooth plate, flywheel and chain
In the whole process of cleaning, the three bicycle parts may be the most dirty parts. Because the accessories left on the oil, dust, the most easy to stick. We can first put the same in the rag on the detergent, dipped in water can go to clean the dental plate, in the time of the disc, try to use a rag to wash every tooth, when washed with water, you Will be pleasantly surprised to find that in the scrub with detergent wipes, the tooth plate has been bright as new.
Next to wash is the flywheel, wash flywheel to remove the rear wheel cleaning. First to relax after the brakes, so the brake is not sandwiched the wheel. First turn the rear of the screw on both sides of the screw loose, this time gently pat about the rear wheel, the wheels will be able to come out. Put the wheels on the ground, with a rag on the flywheel carefully wiped, the wheels back to the car to pay attention to the location after the dial, slowly opened the dial can be put into the wheel. This process is very simple, after a two disassembly can be understood.
Finally, the chain is to be cleaned, after a long ride, the chain is easy to stick a lot of sediment. There are many ways to wash the chain, the author here to introduce two methods: the first is the use of kerosene chain, the sticky kerosene wipes wrapped around the chain to drag back and forth. The drawback is to let their body left the smell, stained with grease and grease. The second method is to use detergent. It is important to note that in the wash chain, it is best to use about 45 degrees of hot water, the temperature is easier to play its cleaning effect. In addition to the need to use a sticky detergent cloth wipe the chain back and forth, it is best to use a little rough brush slowly cut each section of the chain, and soon the black chain will show the original color.
Precautions:
It is important to note that before the maintenance, you must dry the water on the bicycle with a dry cloth, especially the bicycle parts - the chain, the flywheel, the dental plate, and the best of all the water on the bicycle. The
Recommended attention